| Page affichée à 11:31:39 jeudi 21 novembre 2024 Ce site n'utilise pas de cookie |
 |
Dôme acoustique | Compteur pour tout le site : 16 446 766 Nombre actuel de lecteurs : 352 J'ai besoin d'aide pour les menus déroulants |
Faire un don par PayPal |
| Le site de Dominique, un amateur passionné |
4-11 : Paramètres de THIELE et SMALL des haut-parleurs
Mise à jour : 6 novembre 2024, Antidote 11.
Constante de calcul :
Mise à jour du sous-programme : 25 juin 2024, Antidote 11, l'altitude pas défaut est passée de 50 à 100 m.
| Définition | Paramètre | Valeur | Calculs intermédiaires |
|---|---|---|---|
| Température de l'air | Temp | 20.0 °C | Pression de référence à 0 m : 101325.0 Pa Pression à 100.0 m : 100129.4 Pa Ro air sec = 1.19 kg/m3 C air sec = 343.10 m/s Ro vapeur = 0.74 kg/m3 C vapeur = 435.22 m/s |
| Altitude | H | 100.0 m | |
| Humidité relative de l'air | Hr | 40.0 % | |
| Célérité du son | C | 343.711 m/s | |
| Masse volumique de l'air à 40% d'Hr | Ro | 1.187 kg/m3 | |
| Impédance du milieu | Zi | 407.8 kg/(m2*s) |
Paramètres de THIELE et SMALL des haut-parleurs .
| N° HP T&S |
Marque | Avis mar- que |
Référence | Avis HP |
Diam cm |
Type | Type calculé |
Imp Ω |
Fs Hz |
Vas L |
Re Ω |
Qms | Qes | Qts | Mms g |
B.L N/A |
Sd cm2 |
Le mH |
Sens dB/ 2.83V /m |
Xmax ±mm |
Paes W |
SPL dB |
6674 | DAYTON | 0 | CE32A-4 | 1 | 3 | LB | M | 4.00 | 262.1 | 0.0 | 3.57 | 2.860 | 1.240 | 0.865 | 0.4 | 1.4 | 3.9 | 0.150 | 80.1 | ±0.4 | 2 | 80.4 | 7727 | DAYTON | 0 | DMA58-8 | 1 | 5 | LB | M | 8.00 | 166.2 | 0.1 | 6.90 | 2.450 | 0.690 | 0.538 | 1.9 | 4.5 | 14.5 | 0.400 | 82.3 | ±1.1 | 15 | 94.3 | 5462 | DAYTON | 0 | ND65-4 | 1 | 5 | LB | M | 4.00 | 89.5 | 0.5 | 3.50 | 5.560 | 0.680 | 0.606 | 2.0 | 2.4 | 15.6 | 0.440 | 83.0 | ±3.0 | 15 | 92.4 | 5911 | DAYTON | 0 | ND65-8 | 1 | 5 | LB | M | 8.00 | 77.4 | 0.7 | 7.40 | 4.010 | 0.460 | 0.413 | 2.0 | 4.0 | 15.6 | 1.040 | 80.9 | ±3.2 | 15 | 93.4 | 6144 | DAYTON | 0 | RS75-4 | 1 | 5 | LB | M | 4.00 | 154.1 | 0.3 | 3.20 | 5.390 | 0.910 | 0.779 | 1.1 | 1.9 | 15.2 | 0.190 | 86.9 | ±1.7 | 15 | 95.8 | 6892 | DAYTON | 0 | PC68-4 | 1 | 6 | LB | M | 4.00 | 117.1 | 0.7 | 3.80 | 2.490 | 0.870 | 0.645 | 1.7 | 2.3 | 21.2 | 0.290 | 86.3 | ±2.3 | 20 | 97.1 | 7439 | DAYTON | 0 | DMA80-4 | 1 | 8 | LB | M | 8.00 | 93.5 | 1.4 | 4.00 | 1.970 | 0.510 | 0.405 | 2.8 | 3.6 | 31.2 | 0.200 | 88.6 | ±2.5 | 25 | 100.5 | 6947 | DAYTON | 0 | DMA90-4 | 1 | 8 | LB | M | 4.00 | 88.2 | 2.3 | 3.80 | 2.500 | 0.560 | 0.458 | 3.0 | 3.3 | 38.5 | 0.300 | 89.7 | ±3.1 | 30 | 102.2 | 7313 | DAYTON | 0 | DMA90-8 | 1 | 8 | LB | M | 8.00 | 94.2 | 1.7 | 7.30 | 2.650 | 0.730 | 0.572 | 3.5 | 4.5 | 38.5 | 0.500 | 85.3 | ±2.7 | 30 | 100.7 | 4083 | DAYTON | 0 | DS90-8 | 1 | 8 | LB | M | 8.00 | 74.7 | 1.7 | 6.50 | 2.070 | 0.500 | 0.403 | 3.6 | 4.7 | 31.2 | 0.580 | 84.5 | ±2.8 | 20 | 97.6 | 6698 | DAYTON | 0 | DSA90-8 | 1 | 8 | LB | M | 8.00 | 66.6 | 2.3 | 6.60 | 2.150 | 0.450 | 0.372 | 3.4 | 4.6 | 31.2 | 0.530 | 84.6 | ±3.2 | 20 | 97.7 | 7929 | DAYTON | 0 | ND90-4 | 1 | 8 | LB | M | 4.00 | 90.2 | 1.1 | 3.60 | 5.100 | 0.720 | 0.631 | 4.0 | 3.4 | 31.2 | 0.620 | 85.8 | ±2.4 | 20 | 96.5 | 7513 | DAYTON | 0 | ND90-8 | 1 | 8 | LB | M | 8.00 | 70.7 | 1.8 | 7.50 | 4.710 | 0.750 | 0.647 | 3.9 | 4.2 | 31.2 | 1.080 | 81.5 | ±3.5 | 20 | 95.4 | 3804 | DAYTON | 0 | ND91-4 | 3 | 8 | LB | M | 8.00 | 63.4 | 1.5 | 4.10 | 3.060 | 0.440 | 0.385 | 5.6 | 4.5 | 30.4 | 0.740 | 84.2 | ±3.5 | 30 | 97.1 | 5383 | DAYTON | 0 | ND91-4 v2015 | 1 | 8 | LB | M | 8.00 | 74.0 | 1.4 | 4.30 | 4.240 | 0.450 | 0.407 | 4.3 | 4.4 | 30.4 | 0.830 | 85.7 | ±3.4 | 30 | 98.8 | 3805 | DAYTON | 0 | ND91-8 | 3 | 8 | LB | M | 8.00 | 69.6 | 1.3 | 7.40 | 3.080 | 0.460 | 0.400 | 5.2 | 6.0 | 30.4 | 1.420 | 82.1 | ±3.3 | 30 | 97.6 | 5384 | DAYTON | 0 | ND91-8 v2015 | 1 | 8 | LB | M | 8.00 | 70.7 | 1.5 | 7.80 | 4.290 | 0.530 | 0.472 | 4.3 | 5.3 | 30.4 | 1.240 | 82.2 | ±3.8 | 30 | 98.0 | 7547 | DAYTON | 0 | PC83-4 | 2 | 8 | LB | M | 4.00 | 80.1 | 2.0 | 3.90 | 3.410 | 0.640 | 0.539 | 2.5 | 2.8 | 30.2 | 0.380 | 87.1 | ±2.0 | 30 | 93.5 | 7115 | DAYTON | 0 | PC83-8 | 1 | 8 | LB | M | 8.00 | 82.1 | 1.7 | 6.80 | 3.680 | 0.760 | 0.630 | 2.8 | 3.6 | 30.2 | 0.600 | 83.6 | ±2.0 | 30 | 93.0 | 5134 | DAYTON | 0 | PS95-8 | 3 | 8 | LB | M | 8.00 | 115.0 | 0.9 | 7.26 | 8.400 | 0.830 | 0.755 | 2.4 | 3.9 | 28.3 | 0.610 | 84.6 | ±1.6 | 10 | 95.4 | 5385 | DAYTON | 0 | PS95-8 v2015 | 1 | 8 | LB | M | 8.00 | 119.8 | 0.9 | 7.10 | 7.330 | 0.800 | 0.721 | 2.1 | 3.8 | 28.3 | 0.630 | 85.6 | ±1.6 | 10 | 96.2 | 3027 | DAYTON | 0 | RS100 | 3 | 8 | LB | M | 4.00 | 80.0 | 2.0 | 3.00 | 3.100 | 0.570 | 0.481 | 3.9 | 3.2 | 37.4 | 0.670 | 88.8 | ±3.3 | 30 | 100.4 | 3157 | DAYTON | 0 | RS100-4 | 3 | 8 | LB | M | 4.00 | 80.2 | 2.0 | 3.00 | 3.100 | 0.570 | 0.481 | 3.9 | 3.2 | 37.4 | 0.670 | 88.8 | ±3.3 | 30 | 100.4 | 6589 | DAYTON | 0 | RS100-4 v2018 | 1 | 8 | LB | M | 4.00 | 84.8 | 1.5 | 3.00 | 2.550 | 0.660 | 0.524 | 4.2 | 3.2 | 35.3 | 0.280 | 87.5 | ±2.8 | 30 | 99.0 | 7541 | DAYTON | 0 | RS100-4 vp JPP | 6 | 8 | LB | M | 4.00 | 92.3 | 0.9 | 3.00 | 3.370 | 0.730 | 0.600 | 6.0 | 3.8 | 35.3 | 0.060 | 86.0 | ±2.2 | 30 | 97.5 | 4790 | DAYTON | 0 | RS100-8 4 | 1 | 8 | LB | M | 8.00 | 92.2 | 1.4 | 6.40 | 2.370 | 0.760 | 0.575 | 3.6 | 4.2 | 35.3 | 0.500 | 84.6 | ±2.7 | 30 | 99.4 | 6690 | DAYTON | 0 | RS100-8 v2018 | 1 | 8 | LB | M | 8.00 | 92.2 | 1.4 | 6.40 | 2.370 | 0.760 | 0.575 | 3.6 | 4.2 | 35.3 | 0.500 | 84.6 | ±2.7 | 30 | 99.4 | 7786 | DAYTON | 0 | RS100-8 vp aimant chaud | 6 | 8 | LB | M | 8.00 | 75.2 | 1.9 | 6.18 | 1.946 | 0.677 | 0.502 | 4.2 | 4.3 | 35.3 | 0.150 | 83.8 | ±3.2 | 30 | 98.4 | 7790 | DAYTON | 0 | RS100-8 vp aimant chaud 2 | 6 | 8 | LB | M | 8.00 | 75.2 | 2.0 | 6.05 | 1.850 | 0.595 | 0.450 | 3.9 | 4.3 | 35.3 | 0.160 | 84.8 | ±3.2 | 30 | 99.3 | 7757 | DAYTON | 0 | RS100-8 vp1 | 6 | 8 | LB | M | 8.00 | 89.7 | 1.3 | 5.97 | 2.415 | 0.802 | 0.602 | 4.4 | 4.3 | 35.3 | 0.160 | 83.8 | ±2.6 | 30 | 98.2 | 7758 | DAYTON | 0 | RS100-8 vp2 | 6 | 8 | LB | M | 8.00 | 89.8 | 1.4 | 6.09 | 2.513 | 0.903 | 0.664 | 3.9 | 3.9 | 35.3 | 0.150 | 83.7 | ±2.7 | 30 | 98.2 | 5407 | DAYTON | 0 | RS100-8 vp2015-3 rodé 50h | 6 | 8 | LB | M | 8.00 | 99.4 | 1.2 | 6.40 | 1.990 | 0.800 | 0.571 | 3.6 | 4.2 | 35.3 | 0.300 | 84.8 | ±2.3 | 30 | 99.5 | 5652 | DAYTON | 0 | RS100P-4 | 1 | 8 | STD | M | 4.00 | 84.8 | 1.9 | 3.00 | 2.670 | 0.670 | 0.536 | 3.5 | 2.9 | 36.3 | 0.260 | 88.5 | ±3.2 | 30 | 100.1 | 5278 | DAYTON | 0 | RS100P-8 | 1 | 8 | STD | M | 8.00 | 95.5 | 1.8 | 6.60 | 2.180 | 0.710 | 0.536 | 2.8 | 4.0 | 36.3 | 0.520 | 86.3 | ±2.8 | 30 | 101.2 | 3307 | DAYTON | 0 | RS100S-8 | 3 | 8 | LB | M | 8.00 | 85.0 | 1.7 | 6.30 | 3.480 | 1.160 | 0.870 | 4.0 | 3.4 | 37.4 | 0.410 | 82.6 | ±2.7 | 30 | 97.1 | 7283 | DAYTON | 0 | RS100T-8 | 1 | 8 | LB | M | 8.00 | 94.4 | 2.4 | 6.50 | 2.400 | 0.790 | 0.594 | 2.2 | 3.3 | 36.3 | 0.500 | 87.0 | ±3.4 | 30 | 101.8 | 6054 | DAYTON | 0 | RS52AN-8 | 1 | 8 | D | M | 8.00 | 341.0 | 0.1 | 6.00 | 3.160 | 1.180 | 0.859 | 1.6 | 4.2 | 26.4 | 0.130 | 89.6 | ±0.8 | 60 | 107.0 | 7450 | DAYTON | 0 | CX120-8 | 1 | 10 | COAX | BM | 8.00 | 87.5 | 3.0 | 6.22 | 2.890 | 0.570 | 0.476 | 4.3 | 5.1 | 52.5 | 0.630 | 88.5 | ±3.1 | 40 | 104.5 | 7858 | DAYTON | 0 | DMA105-4 | 1 | 10 | LB | BM | 4.00 | 72.7 | 4.3 | 3.40 | 2.600 | 0.630 | 0.507 | 4.6 | 3.4 | 54.1 | 0.300 | 89.8 | ±2.5 | 35 | 99.2 | 7312 | DAYTON | 0 | DMA105-8 | 1 | 10 | LB | G | 8.00 | 72.0 | 4.3 | 7.50 | 2.640 | 0.830 | 0.631 | 4.7 | 4.4 | 54.1 | 0.600 | 85.1 | ±3.8 | 35 | 101.2 | 7236 | DAYTON | 0 | DMA90 | 1 | 10 | LB | BM | 4.00 | 88.0 | 2.3 | 3.80 | 2.500 | 0.560 | 0.458 | 3.0 | 3.4 | 39.0 | 0.300 | 89.7 | ±3.1 | 30 | 102.2 | 4084 | DAYTON | 0 | DS105-4 | 3 | 10 | STD | G | 4.00 | 53.8 | 4.5 | 3.70 | 7.160 | 0.590 | 0.545 | 7.9 | 4.1 | 54.0 | 0.780 | 86.1 | ±5.0 | 35 | 99.4 | 4563 | DAYTON | 0 | DS115-8 | 1 | 10 | STD | BM | 8.00 | 58.9 | 3.8 | 5.90 | 2.120 | 0.460 | 0.378 | 7.8 | 6.1 | 54.1 | 0.860 | 85.6 | ±3.4 | 35 | 100.7 | 6146 | DAYTON | 0 | DSA115-8 | 1 | 10 | STD | BM | 8.00 | 63.3 | 4.0 | 5.90 | 2.000 | 0.530 | 0.419 | 6.6 | 5.4 | 54.1 | 0.630 | 86.1 | ±3.5 | 35 | 101.1 | 5461 | DAYTON | 0 | ND105-4 | 1 | 10 | STD | G | 4.00 | 78.7 | 2.0 | 3.70 | 7.420 | 0.660 | 0.606 | 7.7 | 4.6 | 51.5 | 0.760 | 87.0 | ±2.7 | 30 | 99.6 | 4280 | DAYTON | 0 | ND105-8 | 1 | 10 | STD | G | 8.00 | 65.3 | 3.5 | 7.60 | 7.610 | 0.730 | 0.666 | 6.3 | 5.2 | 51.5 | 1.370 | 83.5 | ±3.9 | 30 | 99.2 | 7928 | DAYTON | 0 | PC105-4 | 1 | 10 | LB | BM | 4.00 | 81.4 | 3.7 | 3.30 | 2.170 | 0.670 | 0.512 | 4.1 | 3.2 | 52.8 | 0.320 | 90.5 | ±2.0 | 40 | 99.0 | 6603 | DAYTON | 0 | PC105-8 | 1 | 10 | LB | G | 8.00 | 84.8 | 3.4 | 6.70 | 2.290 | 0.880 | 0.636 | 4.0 | 4.1 | 52.8 | 0.540 | 86.5 | ±2.9 | 30 | 101.4 | 5065 | DAYTON | 0 | RS125-4 | 3 | 10 | STD | BM | 4.00 | 65.0 | 5.3 | 2.85 | 2.040 | 0.450 | 0.369 | 4.4 | 3.4 | 52.8 | 0.280 | 91.6 | ±3.6 | 30 | 102.8 | 6552 | DAYTON | 0 | RS125-4 v2015 | 1 | 10 | STD | BM | 4.00 | 57.2 | 5.3 | 2.90 | 2.040 | 0.450 | 0.369 | 5.7 | 3.6 | 52.8 | 0.280 | 89.8 | ±3.8 | 30 | 101.1 | 6069 | DAYTON | 0 | RS125-8 | 3 | 10 | STD | BM | 8.00 | 70.0 | 4.2 | 5.86 | 2.700 | 0.590 | 0.484 | 5.3 | 4.8 | 55.4 | 0.590 | 87.2 | ±3.4 | 30 | 101.7 | 5958 | DAYTON | 0 | RS125-8 v2016 | 1 | 10 | STD | BM | 8.00 | 59.2 | 4.8 | 6.20 | 1.740 | 0.420 | 0.338 | 5.9 | 5.7 | 52.8 | 0.570 | 86.8 | ±3.4 | 30 | 101.4 | 7292 | DAYTON | 0 | RS125P-4A | 1 | 10 | STD | BM | 4.00 | 70.0 | 4.0 | 3.10 | 3.190 | 0.570 | 0.484 | 5.3 | 3.6 | 54.1 | 0.320 | 89.9 | ±3.4 | 30 | 101.6 | 4868 | DAYTON | 0 | RS125P-8 REFERENCE WOOFER | 1 | 10 | STD | BM | 8.00 | 70.0 | 4.2 | 5.86 | 2.700 | 0.590 | 0.484 | 5.3 | 4.8 | 55.4 | 0.590 | 87.2 | ±3.4 | 30 | 101.7 | 2949 | DAYTON | 0 | RS125S-8 | 3 | 10 | STD | BM | 8.00 | 82.0 | 3.6 | 6.30 | 3.310 | 0.670 | 0.557 | 4.1 | 4.5 | 52.8 | 0.720 | 87.7 | ±3.2 | 30 | 102.6 | 7293 | DAYTON | 0 | RS125T-8 | 1 | 10 | LB | BM | 8.00 | 76.0 | 3.6 | 6.40 | 2.620 | 0.610 | 0.495 | 5.1 | 5.0 | 54.1 | 0.580 | 87.0 | ±3.0 | 30 | 101.9 | 8073 | DAYTON | 0 | SIG120-4 | 1 | 10 | STD | BM | 4.00 | 74.6 | 3.1 | 3.70 | 4.840 | 0.470 | 0.428 | 6.5 | 4.9 | 56.4 | 0.220 | 89.7 | ±3.2 | 40 | 103.5 | 7066 | DAYTON | 0 | TCP115 | 1 | 10 | STD | BM | 2.00 | 62.3 | 2.4 | 1.99 | 1.880 | 0.470 | 0.376 | 12.4 | 4.5 | 56.8 | 0.800 | 88.9 | ±2.6 | 40 | 99.8 | 6652 | DAYTON | 0 | TCP115-4 | 1 | 10 | STD | BM | 4.00 | 53.8 | 3.1 | 3.20 | 3.140 | 0.400 | 0.355 | 10.0 | 5.2 | 50.3 | 0.970 | 86.8 | ±3.8 | 40 | 99.8 | 3297 | DAYTON | 0 | DA135-8 | 1 | 12 | STD | G | 8.00 | 56.5 | 7.4 | 6.40 | 2.610 | 0.680 | 0.539 | 8.5 | 5.3 | 75.4 | 0.970 | 85.9 | ±3.7 | 30 | 100.7 | 4555 | DAYTON | 0 | DS135-8 | 1 | 12 | STD | BM | 8.00 | 50.9 | 7.6 | 5.90 | 1.940 | 0.440 | 0.359 | 10.3 | 6.7 | 75.4 | 0.880 | 86.8 | ±4.3 | 50 | 103.4 | 6147 | DAYTON | 0 | DSA135-8 | 1 | 12 | STD | G | 8.00 | 51.8 | 7.9 | 5.90 | 2.040 | 0.470 | 0.382 | 9.5 | 6.2 | 75.4 | 0.780 | 87.0 | ±4.5 | 50 | 103.6 | 7814 | DAYTON | 0 | DSA135-8 vp | 6 | 12 | STD | G | 8.00 | 54.4 | 7.0 | 7.10 | 2.367 | 0.526 | 0.430 | 9.8 | 6.7 | 75.4 | 0.500 | 85.8 | ±4.4 | 50 | 103.2 | 6252 | DAYTON | 0 | PA130-8 | 1 | 12 | LB | BM | 8.00 | 83.4 | 4.0 | 7.10 | 3.210 | 0.600 | 0.506 | 7.1 | 6.6 | 73.9 | 0.710 | 88.3 | ±3.0 | 50 | 105.9 | 8231 | DAYTON | 0 | CX150-8 | 1 | 14 | COAX | G | 8.00 | 63.9 | 9.3 | 6.10 | 5.380 | 0.510 | 0.466 | 11.0 | 7.3 | 108.8 | 1.030 | 90.0 | ±4.6 | 80 | 109.0 | 6030 | DAYTON | 0 | DC-130B4 | 1 | 14 | STD | BM | 4.00 | 51.8 | 12.3 | 3.20 | 2.520 | 0.410 | 0.353 | 9.0 | 4.8 | 91.6 | 0.500 | 92.2 | ±4.1 | 40 | 105.2 | 7650 | DAYTON | 0 | DC130A-8 | 1 | 14 | STD | G | 8.00 | 53.2 | 11.8 | 5.70 | 1.900 | 0.510 | 0.402 | 8.9 | 5.8 | 91.6 | 0.750 | 88.9 | ±2.5 | 40 | 100.2 | 7653 | DAYTON | 0 | DC130A-8 vp1 | 6 | 14 | STD | G | 8.00 | 51.0 | 12.5 | 5.75 | 2.470 | 0.509 | 0.422 | 9.2 | 5.8 | 91.6 | 1.000 | 88.5 | ±2.5 | 40 | 99.1 | 7654 | DAYTON | 0 | DC130A-8 vp2 | 6 | 14 | STD | G | 8.00 | 49.5 | 12.3 | 5.86 | 2.416 | 0.509 | 0.420 | 9.9 | 6.0 | 91.6 | 0.990 | 88.0 | ±4.0 | 40 | 102.7 | 7084 | DAYTON | 0 | DC130B4 | 1 | 14 | STD | BM | 4.00 | 51.8 | 12.3 | 3.20 | 2.520 | 0.410 | 0.353 | 9.0 | 4.8 | 91.6 | 0.500 | 92.2 | ±4.1 | 40 | 105.2 | 5641 | DAYTON | 0 | DC130B8 | 1 | 14 | STD | G | 8.00 | 52.5 | 12.4 | 5.70 | 1.850 | 0.480 | 0.381 | 8.7 | 5.8 | 91.6 | 0.770 | 89.2 | ±4.1 | 40 | 104.6 | 4596 | DAYTON | 0 | DC130BS-4 | 1 | 14 | STD | G | 4.00 | 58.5 | 11.4 | 3.50 | 2.180 | 0.520 | 0.420 | 7.9 | 4.4 | 93.3 | 0.610 | 92.0 | ±3.3 | 30 | 104.1 | 5482 | DAYTON | 0 | DC130BS-8 | 1 | 14 | STD | G | 8.00 | 61.2 | 8.8 | 5.80 | 2.160 | 0.570 | 0.451 | 9.0 | 5.9 | 91.6 | 0.870 | 88.9 | ±3.0 | 30 | 103.2 | 7859 | DAYTON | 0 | E150HE-44 | 1 | 14 | DB | G | 8.00 | 40.0 | 7.7 | 6.60 | 2.940 | 0.450 | 0.390 | 26.2 | 9.8 | 95.0 | 1.600 | 83.2 | ±8.4 | 200 | 106.4 | 7220 | DAYTON | 0 | E160CF-8 | 1 | 14 | STD | G | 8.00 | 52.5 | 13.7 | 6.10 | 4.610 | 0.510 | 0.459 | 11.1 | 6.6 | 108.8 | 0.710 | 89.1 | ±4.0 | 100 | 104.5 | 6015 | DAYTON | 0 | ES140TI-8 | 1 | 14 | STD | G | 8.00 | 49.0 | 8.1 | 6.25 | 6.640 | 0.480 | 0.448 | 17.7 | 8.4 | 98.5 | 0.970 | 86.0 | ±5.0 | 100 | 104.6 | 7221 | DAYTON | 0 | ES140TiA-8 | 1 | 14 | STD | G | 8.00 | 41.7 | 9.5 | 6.60 | 5.840 | 0.500 | 0.461 | 20.9 | 8.5 | 98.5 | 1.030 | 84.2 | ±5.0 | 100 | 101.5 | 5549 | DAYTON | 0 | LW150-4 | 1 | 14 | STD | G | 4.00 | 62.6 | 3.5 | 3.60 | 6.010 | 0.720 | 0.643 | 21.8 | 6.5 | 91.6 | 0.860 | 86.2 | ±2.6 | 40 | 100.0 | 7496 | DAYTON | 0 | ND140-4 | 1 | 14 | STD | G | 4.00 | 59.0 | 7.2 | 3.70 | 5.350 | 0.720 | 0.635 | 10.6 | 4.5 | 86.6 | 0.790 | 88.5 | ±4.0 | 40 | 102.3 | 6158 | DAYTON | 0 | ND140-8 | 1 | 14 | STD | G | 8.00 | 56.5 | 7.7 | 7.80 | 5.010 | 0.790 | 0.682 | 10.8 | 6.1 | 86.6 | 1.440 | 84.6 | ±4.2 | 40 | 101.6 | 6073 | DAYTON | 0 | PK165-8 | 1 | 14 | STD | G | 8.00 | 91.5 | 7.7 | 6.80 | 7.630 | 0.770 | 0.699 | 7.1 | 6.0 | 113.1 | 0.810 | 91.5 | ±1.5 | 100 | 103.4 | 6233 | DAYTON | 0 | RS150-4 | 3 | 14 | STD | G | 4.00 | 51.8 | 12.2 | 2.90 | 2.670 | 0.470 | 0.400 | 7.8 | 4.0 | 84.9 | 0.470 | 92.0 | ±4.0 | 40 | 103.2 | 6553 | DAYTON | 0 | RS150-4 v2015 | 1 | 14 | STD | G | 4.00 | 45.1 | 16.4 | 3.10 | 1.960 | 0.400 | 0.332 | 7.7 | 4.1 | 85.0 | 0.340 | 91.9 | ±4.0 | 40 | 102.4 | 6070 | DAYTON | 0 | RS150-8 | 1 | 14 | STD | G | 8.00 | 47.8 | 15.0 | 6.18 | 2.150 | 0.490 | 0.399 | 7.5 | 5.3 | 84.9 | 0.590 | 88.3 | ±4.0 | 40 | 101.8 | 6904 | DAYTON | 0 | RS150P-4A | 1 | 14 | LB | G | 4.00 | 43.7 | 15.7 | 3.50 | 1.850 | 0.420 | 0.342 | 8.6 | 4.4 | 85.0 | 0.390 | 90.5 | ±4.0 | 40 | 101.6 | 4856 | DAYTON | 0 | RS150P-8 REFERENCE WOOFER | 1 | 14 | STD | BM | 8.00 | 49.2 | 16.2 | 6.30 | 1.720 | 0.400 | 0.325 | 6.5 | 5.6 | 85.0 | 0.610 | 89.9 | ±4.0 | 40 | 104.1 | 6251 | DAYTON | 0 | RS150P-8A | 1 | 14 | STD | G | 8.00 | 47.8 | 16.6 | 6.30 | 1.660 | 0.430 | 0.342 | 6.8 | 5.5 | 85.0 | 0.550 | 89.3 | ±4.0 | 40 | 103.2 | 2398 | DAYTON | 0 | RS150S-8 | 3 | 14 | STD | G | 8.00 | 53.8 | 17.0 | 6.00 | 2.520 | 0.560 | 0.458 | 5.2 | 4.3 | 84.9 | 0.760 | 90.0 | ±4.0 | 40 | 102.8 | 8074 | DAYTON | 0 | SIG150-4 | 1 | 14 | STD | G | 4.00 | 61.5 | 8.7 | 3.70 | 5.780 | 0.530 | 0.485 | 9.9 | 5.2 | 96.0 | 0.350 | 91.1 | ±4.0 | 60 | 105.7 | 8151 | DAYTON | 0 | 10RS180p vp3 | 6 | 17 | STD | G | 8.00 | 52.5 | 16.1 | 6.62 | 2.370 | 0.490 | 0.406 | 12.8 | 7.6 | 126.7 | 0.190 | 89.6 | ±3.0 | 60 | 104.3 | 8152 | DAYTON | 0 | 10RS180p vp4 | 6 | 17 | STD | G | 8.00 | 56.6 | 13.4 | 6.68 | 2.520 | 0.550 | 0.451 | 13.3 | 7.6 | 126.7 | 0.180 | 89.2 | ±3.0 | 60 | 104.7 | 8184 | DAYTON | 0 | APOLLO 6N | 1 | 17 | STD | M | 8.00 | 102.9 | 3.5 | 6.10 | 8.020 | 0.290 | 0.280 | 16.9 | 15.1 | 132.7 | 1.290 | 94.3 | ±2.3 | 200 | 117.2 | 3298 | DAYTON | 0 | DA175-8 | 1 | 17 | STD | G | 8.00 | 39.0 | 16.3 | 5.90 | 3.310 | 0.700 | 0.578 | 25.3 | 7.2 | 133.0 | 1.140 | 84.7 | ±4.3 | 50 | 100.0 | 6224 | DAYTON | 0 | DC160-4 | 1 | 17 | STD | G | 4.00 | 39.0 | 15.0 | 3.40 | 3.310 | 0.490 | 0.427 | 29.1 | 7.0 | 136.8 | 0.990 | 88.3 | ±3.2 | 50 | 99.8 | 4737 | DAYTON | 0 | DC160-8 | 3 | 17 | STD | G | 8.00 | 34.3 | 24.5 | 6.70 | 3.470 | 0.360 | 0.326 | 22.4 | 9.5 | 134.8 | 2.340 | 87.1 | ±3.2 | 50 | 99.8 | 7081 | DAYTON | 0 | DC160-8 v2019 | 1 | 17 | STD | G | 8.00 | 35.7 | 17.9 | 6.60 | 3.460 | 0.380 | 0.342 | 28.3 | 10.5 | 134.8 | 2.260 | 86.1 | ±3.2 | 50 | 100.0 | 6949 | DAYTON | 0 | DC160-8 vp | 6 | 17 | STD | G | 8.00 | 33.9 | 27.9 | 7.10 | 3.470 | 0.400 | 0.359 | 21.3 | 9.0 | 138.9 | 1.640 | 86.9 | ±3.2 | 50 | 99.0 | 7160 | DAYTON | 0 | DC160/8 vp | 6 | 17 | STD | G | 8.00 | 35.2 | 28.6 | 7.00 | 3.705 | 0.405 | 0.365 | 19.4 | 8.6 | 138.9 | 1.620 | 87.4 | ±3.2 | 50 | 99.5 | 2726 | DAYTON | 0 | DC160S-8 | 1 | 17 | STD | G | 8.00 | 32.3 | 24.5 | 6.60 | 2.910 | 0.320 | 0.288 | 25.2 | 10.3 | 134.8 | 1.540 | 86.9 | ±3.2 | 50 | 99.8 | 5687 | DAYTON | 0 | DCS165-4 | 1 | 17 | STD | G | 4.00 | 35.7 | 12.1 | 3.40 | 6.620 | 0.360 | 0.341 | 35.8 | 8.7 | 124.7 | 1.430 | 87.5 | ±6.0 | 100 | 104.9 | 6956 | DAYTON | 0 | DS175-8 | 1 | 17 | STD | G | 8.00 | 37.0 | 17.0 | 5.70 | 1.630 | 0.320 | 0.267 | 25.3 | 10.2 | 128.7 | 1.060 | 87.8 | ±4.5 | 70 | 105.6 | 5952 | DAYTON | 0 | DSA175-8 | 1 | 17 | STD | G | 8.00 | 38.4 | 18.7 | 5.80 | 1.660 | 0.350 | 0.289 | 21.4 | 9.2 | 128.7 | 0.850 | 88.2 | ±4.8 | 70 | 106.1 | 7830 | DAYTON | 0 | E180HE-44 | 1 | 17 | STD | G | 8.00 | 35.0 | 16.1 | 6.80 | 2.930 | 0.540 | 0.456 | 33.3 | 9.6 | 136.1 | 1.500 | 83.8 | ±9.7 | 200 | 107.1 | 5351 | DAYTON | 0 | ES180TI-8 | 1 | 17 | STD | G | 8.00 | 34.3 | 19.6 | 6.80 | 5.170 | 0.430 | 0.397 | 27.1 | 9.6 | 132.7 | 1.040 | 85.3 | ±5.3 | 100 | 102.4 | 7211 | DAYTON | 0 | ES180TiA-8 | 1 | 17 | STD | G | 8.00 | 33.7 | 20.7 | 7.40 | 4.900 | 0.440 | 0.404 | 26.6 | 9.7 | 132.7 | 1.130 | 84.9 | ±5.3 | 100 | 102.0 | 7980 | DAYTON | 0 | GF180-4 | 1 | 17 | STD | G | 8.00 | 49.0 | 16.5 | 4.40 | 3.430 | 0.480 | 0.421 | 15.2 | 6.5 | 130.2 | 1.100 | 90.6 | ±3.8 | 40 | 105.1 | 7162 | DAYTON | 0 | PA165-8 | 1 | 17 | STD | BM | 8.00 | 80.8 | 9.2 | 5.15 | 2.190 | 0.600 | 0.471 | 8.6 | 6.1 | 120.8 | 0.540 | 93.0 | ±3.2 | 75 | 110.8 | 5815 | DAYTON | 0 | PM180-8 | 1 | 17 | STD | BM | 8.00 | 53.2 | 28.0 | 6.40 | 4.130 | 0.300 | 0.280 | 7.7 | 7.4 | 130.7 | 0.680 | 94.4 | ±3.4 | 30 | 109.2 | 3457 | DAYTON | 0 | PS180-8 | 1 | 17 | LB | M | 8.00 | 48.2 | 40.4 | 6.32 | 3.860 | 0.240 | 0.226 | 6.7 | 7.3 | 132.7 | 0.690 | 95.8 | ±3.8 | 30 | 110.4 | 6232 | DAYTON | 0 | PS180-8 v2017 | 1 | 17 | LB | BM | 8.00 | 58.5 | 27.6 | 6.40 | 3.640 | 0.360 | 0.328 | 6.6 | 6.6 | 132.7 | 0.630 | 94.8 | ±3.4 | 30 | 109.6 | 6548 | DAYTON | 0 | PS65LP-4 | 2 | 17 | LB | M | 4.00 | 67.3 | 17.3 | 3.20 | 3.850 | 0.260 | 0.244 | 6.8 | 6.0 | 122.7 | 0.390 | 99.0 | ±2.7 | 40 | 112.0 | 5246 | DAYTON | 0 | RS180-4 v2015 | 1 | 17 | STD | G | 4.00 | 39.0 | 21.2 | 3.05 | 2.130 | 0.590 | 0.462 | 17.1 | 4.7 | 124.7 | 0.450 | 89.5 | ±6.0 | 60 | 104.0 | 4690 | DAYTON | 0 | RS180-8 | 3 | 17 | STD | G | 8.00 | 42.4 | 20.7 | 6.22 | 1.450 | 0.490 | 0.366 | 14.8 | 7.1 | 124.7 | 0.740 | 88.2 | ±5.0 | 60 | 105.7 | 5247 | DAYTON | 0 | RS180-8 v2015 | 3 | 17 | STD | G | 8.00 | 39.0 | 24.4 | 6.36 | 2.130 | 0.590 | 0.462 | 14.9 | 6.3 | 124.7 | 0.730 | 86.9 | ±6.0 | 60 | 104.0 | 6597 | DAYTON | 0 | RS180-8 v2018 | 1 | 17 | STD | G | 8.00 | 35.7 | 24.4 | 6.40 | 1.220 | 0.420 | 0.312 | 17.8 | 7.8 | 124.7 | 0.730 | 87.2 | ±5.4 | 60 | 104.8 | 5941 | DAYTON | 0 | RS180P-4 | 1 | 17 | STD | G | 4.00 | 37.7 | 27.3 | 3.10 | 1.980 | 0.480 | 0.386 | 14.7 | 4.7 | 126.7 | 0.470 | 90.9 | ±6.0 | 60 | 105.0 | 6235 | DAYTON | 0 | RS180P-4 v2017 | 3 | 17 | STD | G | 4.00 | 38.4 | 24.0 | 3.10 | 2.080 | 0.480 | 0.390 | 16.1 | 5.0 | 126.7 | 0.470 | 90.6 | ±6.0 | 60 | 105.2 | 5128 | DAYTON | 0 | RS180P-8 | 1 | 17 | STD | G | 8.00 | 45.5 | 21.9 | 6.30 | 1.490 | 0.430 | 0.334 | 12.6 | 7.3 | 126.7 | 0.840 | 89.8 | ±4.7 | 60 | 107.4 | 2509 | DAYTON | 0 | RS180S-8 | 3 | 17 | STD | G | 8.00 | 43.7 | 21.5 | 6.40 | 1.910 | 0.580 | 0.445 | 13.4 | 6.4 | 124.7 | 0.860 | 87.9 | ±5.6 | 60 | 105.6 | 5949 | DAYTON | 0 | RS180S-8 v2016 | 1 | 17 | STD | G | 8.00 | 37.7 | 23.0 | 6.40 | 1.450 | 0.490 | 0.366 | 16.9 | 7.2 | 124.7 | 0.790 | 87.0 | ±5.5 | 60 | 104.6 | 7778 | DAYTON | 0 | RS180S-8 vp Steph1 | 6 | 17 | STD | G | 8.00 | 48.2 | 16.1 | 6.09 | 2.242 | 0.602 | 0.475 | 14.8 | 6.7 | 124.7 | 0.740 | 87.9 | ±4.8 | 60 | 105.5 | 7783 | DAYTON | 0 | RS180S-8 vp Steph2 | 6 | 17 | STD | G | 8.00 | 45.7 | 19.8 | 6.30 | 2.198 | 0.601 | 0.472 | 13.4 | 6.3 | 124.7 | 0.370 | 88.0 | ±5.4 | 60 | 105.7 | 8186 | DAYTON | 0 | SIG180-4 | 1 | 17 | STD | G | 4.00 | 40.5 | 23.2 | 3.70 | 5.190 | 0.410 | 0.380 | 19.1 | 6.6 | 143.0 | 0.470 | 91.1 | ±5.0 | 80 | 105.8 | 474 | DAYTON | 0 | 8 DVC | 1 | 21 | STD | G | 4.00 | 28.0 | 39.6 | 3.00 | 3.400 | 0.470 | 0.413 | 42.9 | 6.9 | 193.8 | 1.200 | 88.9 | ±10.1 | 150 | 107.5 | 8185 | DAYTON | 0 | APOLLO 8N | 1 | 21 | STD | M | 8.00 | 94.0 | 8.8 | 6.00 | 4.430 | 0.350 | 0.324 | 18.4 | 13.7 | 201.0 | 0.170 | 96.4 | ±2.6 | 200 | 119.2 | 3478 | DAYTON | 0 | DA215-8 | 1 | 21 | STD | G | 8.00 | 34.9 | 42.8 | 6.80 | 1.950 | 0.450 | 0.366 | 30.4 | 10.0 | 211.2 | 1.190 | 88.7 | ±4.9 | 60 | 106.7 | 6250 | DAYTON | 0 | DC200-8 | 1 | 21 | STD | G | 8.00 | 30.3 | 45.7 | 6.41 | 3.060 | 0.490 | 0.422 | 37.7 | 9.7 | 211.2 | 2.320 | 87.1 | ±4.5 | 60 | 102.4 | 5459 | DAYTON | 0 | DCS205-4 | 1 | 21 | STD | G | 4.00 | 32.3 | 27.0 | 3.90 | 6.280 | 0.400 | 0.376 | 57.6 | 10.7 | 213.8 | 1.780 | 88.7 | ±7.0 | 150 | 108.4 | 6327 | DAYTON | 0 | DS215-8 | 1 | 21 | STD | G | 8.00 | 34.3 | 43.1 | 5.80 | 1.750 | 0.380 | 0.312 | 31.2 | 10.1 | 211.2 | 1.250 | 90.0 | ±5.3 | 80 | 108.5 | 5962 | DAYTON | 0 | DSA215-8 | 1 | 21 | STD | G | 8.00 | 35.0 | 37.4 | 5.90 | 1.870 | 0.400 | 0.330 | 34.6 | 10.6 | 211.2 | 1.000 | 89.3 | ±5.0 | 80 | 107.9 | 6760 | DAYTON | 0 | E220CF-8 | 1 | 21 | STD | G | 8.00 | 26.9 | 91.4 | 6.10 | 7.140 | 0.260 | 0.251 | 25.1 | 10.0 | 216.4 | 0.700 | 91.5 | ±5.0 | 150 | 106.0 | 8218 | DAYTON | 0 | MB820-8 | 1 | 21 | STD | BM | 8.00 | 69.0 | 15.8 | 5.26 | 3.830 | 0.520 | 0.458 | 21.1 | 9.6 | 211.2 | 1.040 | 93.8 | ±4.0 | 200 | 115.0 | 7529 | DAYTON | 0 | PA200-8 | 1 | 21 | STD | G | 8.00 | 55.2 | 26.6 | 6.20 | 6.170 | 0.510 | 0.471 | 19.4 | 9.0 | 210.4 | 1.090 | 92.5 | ±3.0 | 250 | 108.4 | 5753 | DAYTON | 0 | PA220-8 | 1 | 21 | STD | G | 8.00 | 55.2 | 28.3 | 6.20 | 6.170 | 0.510 | 0.471 | 18.2 | 8.8 | 210.4 | 1.090 | 92.8 | ±3.2 | 40 | 108.9 | 4601 | DAYTON | 0 | PM220-8 | 3 | 21 | STD | G | 8.00 | 43.1 | 73.8 | 6.30 | 6.540 | 0.350 | 0.332 | 10.9 | 7.3 | 205.3 | 0.850 | 95.3 | ±4.6 | 40 | 110.5 | 5470 | DAYTON | 0 | PM220-8 v2015 | 1 | 21 | STD | G | 8.00 | 49.1 | 63.0 | 6.50 | 5.080 | 0.410 | 0.379 | 9.9 | 6.9 | 205.3 | 0.800 | 95.5 | ±4.6 | 40 | 111.6 | 3455 | DAYTON | 0 | PS220-8 | 3 | 21 | LB | G | 8.00 | 37.0 | 131.7 | 6.53 | 5.900 | 0.280 | 0.267 | 9.2 | 7.1 | 216.4 | 0.750 | 96.6 | ±4.3 | 40 | 109.7 | 6953 | DAYTON | 0 | PS220-8 8 | 3 | 21 | LB | G | 8.00 | 46.4 | 90.2 | 6.20 | 5.730 | 0.400 | 0.374 | 8.6 | 6.2 | 216.4 | 0.730 | 96.6 | ±4.8 | 40 | 111.6 | 4707 | DAYTON | 0 | PS220-8 v2011 | 3 | 21 | LB | BM | 8.00 | 45.5 | 79.0 | 5.97 | 3.610 | 0.320 | 0.294 | 10.2 | 7.4 | 216.4 | 0.750 | 96.9 | ±4.4 | 40 | 112.6 | 5354 | DAYTON | 0 | PS220-8 v2015 | 3 | 21 | LB | G | 8.00 | 46.4 | 90.2 | 6.20 | 5.730 | 0.400 | 0.374 | 8.6 | 6.2 | 216.4 | 0.730 | 96.6 | ±4.8 | 40 | 111.6 | 6420 | DAYTON | 0 | PS220-8 v2017 | 3 | 21 | LB | BM | 8.00 | 45.5 | 77.0 | 6.00 | 3.610 | 0.320 | 0.294 | 10.4 | 7.5 | 216.4 | 0.750 | 96.8 | ±4.4 | 40 | 112.5 | 6954 | DAYTON | 0 | PS220-8 v2019 | 1 | 21 | LB | G | 8.00 | 46.4 | 90.2 | 6.20 | 5.730 | 0.400 | 0.374 | 8.6 | 6.2 | 216.4 | 0.730 | 96.6 | ±4.8 | 40 | 111.6 | 6685 | DAYTON | 0 | R225P-8A | 1 | 21 | STD | G | 8.00 | 31.6 | 68.8 | 7.10 | 1.250 | 0.460 | 0.336 | 23.6 | 8.5 | 213.8 | 1.020 | 89.2 | ±6.0 | 80 | 107.7 | 4744 | DAYTON | 0 | RS225-4 | 3 | 21 | STD | G | 4.00 | 37.7 | 37.5 | 2.90 | 2.390 | 0.560 | 0.454 | 32.0 | 6.3 | 219.0 | 0.560 | 91.9 | ±5.4 | 80 | 107.6 | 5604 | DAYTON | 0 | RS225-4 v2015 | 1 | 21 | STD | G | 4.00 | 33.0 | 46.4 | 3.20 | 2.020 | 0.520 | 0.414 | 33.1 | 6.5 | 217.0 | 0.490 | 91.0 | ±6.0 | 80 | 106.8 | 3910 | DAYTON | 0 | RS225-8 | 1 | 21 | STD | G | 8.00 | 27.6 | 61.0 | 6.34 | 1.440 | 0.480 | 0.360 | 34.9 | 8.9 | 213.8 | 0.830 | 87.3 | ±7.0 | 80 | 106.1 | 6476 | DAYTON | 0 | RS225-8 v2015 | 1 | 21 | STD | G | 8.00 | 28.3 | 56.8 | 6.50 | 1.460 | 0.510 | 0.378 | 35.7 | 9.0 | 213.8 | 0.860 | 86.9 | ±6.8 | 80 | 105.9 | 5160 | DAYTON | 0 | RS225-8-8 | 1 | 21 | STD | G | 8.00 | 28.3 | 56.8 | 6.53 | 1.460 | 0.510 | 0.378 | 35.7 | 9.0 | 213.8 | 0.860 | 86.9 | ±6.8 | 80 | 105.9 | 5942 | DAYTON | 0 | RS225P-4 | 1 | 21 | STD | G | 4.00 | 37.0 | 52.1 | 3.10 | 1.730 | 0.440 | 0.351 | 22.8 | 6.1 | 213.8 | 0.450 | 93.9 | ±5.8 | 80 | 109.7 | 6686 | DAYTON | 0 | RS225P-4A | 1 | 21 | STD | G | 4.00 | 37.7 | 45.8 | 3.30 | 1.850 | 0.480 | 0.381 | 24.9 | 6.4 | 213.8 | 0.510 | 92.9 | ±5.6 | 80 | 109.0 | 4865 | DAYTON | 0 | RS225P-8 | 3 | 21 | STD | G | 8.00 | 32.3 | 73.5 | 6.50 | 1.280 | 0.440 | 0.327 | 21.2 | 8.0 | 213.8 | 0.850 | 90.4 | ±6.0 | 80 | 108.3 | 7475 | DAYTON | 0 | RS225P-8A | 1 | 21 | STD | G | 8.00 | 31.6 | 68.8 | 7.10 | 1.250 | 0.460 | 0.336 | 23.6 | 8.5 | 213.8 | 1.020 | 89.2 | ±6.6 | 80 | 108.5 | 7616 | DAYTON | 0 | RS225P-8A vp JPP-2021 | 6 | 21 | STD | G | 8.00 | 34.3 | 76.4 | 6.50 | 1.790 | 0.470 | 0.372 | 18.0 | 7.3 | 213.0 | 0.200 | 91.0 | ±7.0 | 80 | 109.5 | 2123 | DAYTON | 0 | RS225S-8 | 3 | 21 | STD | G | 8.00 | 26.9 | 75.3 | 6.40 | 1.420 | 0.530 | 0.386 | 30.5 | 7.9 | 216.4 | 0.940 | 87.4 | ±7.0 | 80 | 105.1 | 3851 | DAYTON | 0 | RSS210HF-4 | 3 | 21 | STD | G | 4.00 | 28.3 | 32.4 | 3.30 | 3.080 | 0.600 | 0.502 | 65.7 | 8.0 | 219.0 | 0.290 | 86.7 | ±9.0 | 280 | 106.2 | 4260 | DAYTON | 0 | RSS210HF-4-8 | 3 | 21 | STD | G | 4.00 | 32.7 | 17.0 | 3.40 | 3.890 | 0.550 | 0.482 | 89.3 | 10.6 | 213.8 | 0.980 | 86.0 | ±8.1 | 280 | 107.9 | 6363 | DAYTON | 0 | RSS210HF-4-8 v2017 | 1 | 21 | STD | SUB | 4.00 | 29.6 | 23.7 | 3.10 | 3.250 | 0.690 | 0.569 | 82.0 | 8.3 | 219.0 | 0.700 | 85.6 | ±9.0 | 280 | 106.1 | 4518 | DAYTON | 0 | RSS210HO-4-8 | 3 | 21 | STD | G | 4.00 | 32.7 | 17.0 | 3.40 | 3.890 | 0.550 | 0.482 | 89.3 | 10.6 | 213.8 | 0.980 | 86.0 | ±8.4 | 300 | 108.2 | 6340 | DAYTON | 0 | RSS210HO-4-8 v2017 | 1 | 21 | STD | G | 4.00 | 29.6 | 18.7 | 3.60 | 3.330 | 0.460 | 0.404 | 99.1 | 12.0 | 213.8 | 0.990 | 85.7 | ±8.6 | 300 | 108.0 | 4258 | DAYTON | 0 | RSS210HO-8-8 | 1 | 21 | STD | G | 8.00 | 28.9 | 25.7 | 6.20 | 2.820 | 0.460 | 0.395 | 75.6 | 13.6 | 213.8 | 1.400 | 84.4 | ±9.9 | 300 | 109.1 | 2777 | DAYTON | 0 | SD215-88 | 3 | 21 | STD | G | 4.00 | 33.7 | 39.6 | 3.00 | 3.400 | 0.470 | 0.413 | 34.4 | 6.8 | 208.7 | 1.200 | 91.3 | ±6.0 | 80 | 106.8 | 5612 | DAYTON | 0 | SD215A-88 | 1 | 21 | STD | G | 4.00 | 31.0 | 38.2 | 3.20 | 3.100 | 0.450 | 0.393 | 42.1 | 7.6 | 208.7 | 1.160 | 90.0 | ±6.0 | 80 | 105.8 | 8012 | DAYTON | 0 | SIG225-4 | 1 | 21 | STD | G | 4.00 | 39.9 | 29.5 | 3.89 | 8.870 | 0.450 | 0.428 | 38.9 | 9.2 | 226.9 | 0.290 | 91.3 | ±5.5 | 100 | 109.4 | 4602 | DAYTON | 0 | ST210-8 | 3 | 21 | STD | G | 8.00 | 51.7 | 24.7 | 6.90 | 4.990 | 0.540 | 0.487 | 26.4 | 10.5 | 221.7 | 1.300 | 90.6 | ±5.6 | 180 | 112.8 | 6112 | DAYTON | 0 | UM-8-22 | 1 | 21 | STD | SUB | 8.00 | 31.6 | 21.3 | 4.20 | 2.510 | 0.750 | 0.577 | 74.5 | 9.1 | 211.2 | 1.140 | 84.3 | ±9.5 | 300 | 107.3 | 5946 | DAYTON | 0 | UM8-22 | 1 | 21 | STD | SUB | 8.00 | 31.6 | 21.3 | 4.20 | 2.510 | 0.750 | 0.577 | 74.5 | 9.1 | 211.2 | 1.140 | 84.3 | ±9.5 | 300 | 107.3 | 707 | DAYTON | 0 | 10 DVC | 3 | 25 | STD | G | 4.00 | 25.0 | 110.4 | 3.10 | 3.200 | 0.430 | 0.379 | 59.7 | 8.2 | 340.7 | 1.200 | 92.1 | ±17.8 | 500 | 116.0 | 8178 | DAYTON | 0 | APOLLO 10N | 1 | 25 | STD | BM | 8.00 | 54.0 | 43.5 | 7.40 | 6.730 | 0.230 | 0.222 | 31.1 | 18.4 | 333.1 | 1.120 | 97.1 | ±4.3 | 250 | 121.6 | 5956 | DAYTON | 0 | DA270-8 10 | 1 | 25 | STD | G | 8.00 | 27.8 | 108.5 | 6.30 | 1.950 | 0.550 | 0.429 | 50.8 | 10.1 | 346.4 | 1.200 | 89.3 | ±6.1 | 80 | 107.7 | 4592 | DAYTON | 0 | DC250-8 | 1 | 25 | STD | G | 8.00 | 28.9 | 111.4 | 6.70 | 4.050 | 0.500 | 0.445 | 44.9 | 10.5 | 343.1 | 2.570 | 90.1 | ±4.5 | 70 | 105.4 | 5650 | DAYTON | 0 | DCS255-4 | 1 | 25 | STD | G | 4.00 | 37.7 | 32.1 | 3.45 | 7.420 | 0.500 | 0.468 | 93.4 | 12.4 | 346.4 | 1.800 | 91.0 | ±4.2 | 200 | 109.0 | 5231 | DAYTON | 0 | DS270-8 | 3 | 25 | STD | G | 8.00 | 30.7 | 84.7 | 5.40 | 2.310 | 0.550 | 0.444 | 55.4 | 10.2 | 353.0 | 1.150 | 90.2 | ±5.5 | 100 | 108.4 | 6812 | DAYTON | 0 | DS270-8 v2018 | 1 | 25 | STD | G | 8.00 | 31.6 | 87.7 | 5.40 | 2.400 | 0.540 | 0.441 | 50.5 | 10.0 | 353.0 | 1.250 | 90.8 | ±5.5 | 100 | 109.0 | 6018 | DAYTON | 0 | DSA270-8 | 1 | 25 | STD | G | 8.00 | 29.6 | 88.1 | 5.40 | 2.090 | 0.470 | 0.384 | 57.3 | 11.1 | 353.0 | 1.070 | 90.6 | ±5.5 | 100 | 109.0 | 5728 | DAYTON | 0 | LS10-44 | 1 | 25 | CAR | G | 8.00 | 34.3 | 30.8 | 7.40 | 5.150 | 0.470 | 0.431 | 131.6 | 21.1 | 366.4 | 5.250 | 86.5 | ±5.8 | 250 | 111.3 | 7895 | DAYTON | 0 | MB1025-8 | 1 | 25 | STD | G | 8.00 | 45.0 | 50.7 | 5.30 | 6.470 | 0.370 | 0.350 | 41.5 | 13.0 | 346.4 | 1.200 | 94.7 | ±3.0 | 350 | 111.6 | 3570 | DAYTON | 0 | PA255-8 | 3 | 25 | STD | G | 8.00 | 46.4 | 59.0 | 5.00 | 9.560 | 0.510 | 0.484 | 33.5 | 9.8 | 346.0 | 1.330 | 94.6 | ±5.0 | 300 | 113.9 | 6946 | DAYTON | 0 | PA255-8 v2017 | 1 | 25 | STD | G | 8.00 | 50.5 | 41.2 | 5.50 | 8.490 | 0.660 | 0.612 | 40.6 | 10.4 | 346.4 | 1.490 | 92.7 | ±5.0 | 300 | 113.8 | 6532 | DAYTON | 0 | RS270-4 | 1 | 25 | STD | G | 4.00 | 20.9 | 98.6 | 3.90 | 1.330 | 0.350 | 0.277 | 98.9 | 12.0 | 346.4 | 0.570 | 89.2 | ±6.0 | 100 | 106.4 | 4751 | DAYTON | 0 | RS270-8 | 3 | 25 | STD | G | 8.00 | 24.9 | 120.5 | 6.78 | 1.750 | 0.520 | 0.401 | 57.0 | 10.8 | 346.4 | 0.900 | 88.2 | ±6.0 | 100 | 106.2 | 6539 | DAYTON | 0 | RS270-8 v2017 | 1 | 25 | STD | G | 8.00 | 29.6 | 96.5 | 6.80 | 2.080 | 0.610 | 0.472 | 53.3 | 10.5 | 356.4 | 0.930 | 88.8 | ±6.0 | 100 | 108.1 | 6364 | DAYTON | 0 | RS270P-4A | 1 | 25 | STD | G | 4.00 | 22.9 | 110.5 | 3.90 | 1.350 | 0.340 | 0.272 | 73.5 | 11.0 | 346.4 | 0.550 | 91.0 | ±6.0 | 100 | 108.2 | 6792 | DAYTON | 0 | RS270P-8A | 1 | 25 | STD | G | 8.00 | 22.9 | 110.5 | 6.80 | 1.330 | 0.420 | 0.319 | 73.5 | 13.1 | 346.4 | 0.880 | 87.7 | ±6.0 | 100 | 106.7 | 2584 | DAYTON | 0 | RS270S-8 | 1 | 25 | STD | G | 8.00 | 26.9 | 147.2 | 6.90 | 1.810 | 0.530 | 0.410 | 40.0 | 9.4 | 346.4 | 1.230 | 90.0 | ±6.0 | 100 | 107.4 | 3852 | DAYTON | 0 | RSS265HF-4 v2012 | 3 | 25 | STD | G | 4.00 | 26.2 | 45.0 | 3.30 | 3.260 | 0.510 | 0.441 | 146.1 | 12.5 | 356.3 | 0.480 | 87.8 | ±9.4 | 350 | 110.4 | 5463 | DAYTON | 0 | RSS265HF-4 V2015 | 3 | 25 | STD | G | 4.00 | 25.6 | 54.0 | 3.50 | 3.060 | 0.530 | 0.452 | 127.4 | 11.6 | 356.3 | 0.960 | 87.9 | ±9.4 | 350 | 109.9 | 7886 | DAYTON | 0 | RSS265HF-4 v2022 | 1 | 25 | STD | G | 4.00 | 25.6 | 54.0 | 3.20 | 3.060 | 0.530 | 0.452 | 127.4 | 11.1 | 356.3 | 0.960 | 88.3 | ±10.5 | 350 | 110.8 | 4009 | DAYTON | 0 | RSS265HF-8 | 3 | 25 | STD | SUB | 8.00 | 24.9 | 51.6 | 6.17 | 2.890 | 0.600 | 0.497 | 133.2 | 14.6 | 346.4 | 1.480 | 84.3 | ±9.4 | 350 | 108.4 | 6798 | DAYTON | 0 | RSS265HF-8 v2018 | 1 | 25 | STD | SUB | 8.00 | 24.9 | 52.5 | 6.45 | 2.680 | 0.592 | 0.485 | 130.9 | 14.9 | 346.4 | 1.570 | 84.3 | ±9.4 | 350 | 108.6 | 4055 | DAYTON | 0 | RSS265HO-4 | 3 | 25 | STD | G | 4.00 | 30.3 | 22.8 | 3.40 | 4.480 | 0.400 | 0.367 | 207.4 | 18.3 | 349.7 | 1.900 | 87.7 | ±7.9 | 600 | 112.8 | 5642 | DAYTON | 0 | RSS265HO-4 v2015 | 1 | 25 | STD | G | 4.00 | 26.9 | 29.4 | 3.50 | 4.020 | 0.390 | 0.356 | 204.1 | 17.6 | 349.7 | 1.740 | 87.2 | ±9.3 | 600 | 112.5 | 4179 | DAYTON | 0 | RSS265HO-44 | 1 | 25 | STD | G | 2.00 | 27.9 | 28.1 | 1.70 | 4.710 | 0.540 | 0.484 | 201.5 | 10.5 | 352.3 | 0.850 | 89.2 | ±10.2 | 600 | 111.4 | 2074 | DAYTON | 0 | SD270-88 | 3 | 25 | STD | G | 4.00 | 29.6 | 112.2 | 3.10 | 3.200 | 0.510 | 0.440 | 46.7 | 7.3 | 359.7 | 1.110 | 93.7 | ±6.0 | 80 | 108.8 | 2323 | DAYTON | 0 | SD270-88 v2009 | 3 | 25 | STD | G | 4.00 | 25.0 | 110.4 | 3.10 | 3.200 | 0.430 | 0.379 | 66.6 | 8.7 | 359.7 | 1.200 | 92.1 | ±6.0 | 80 | 107.1 | 4835 | DAYTON | 0 | SD270A-88 DVC | 1 | 25 | STD | G | 4.00 | 26.2 | 107.5 | 3.16 | 3.230 | 0.500 | 0.433 | 57.7 | 7.8 | 346.4 | 1.120 | 91.9 | ±6.0 | 80 | 106.5 | 8011 | DAYTON | 0 | SIG270-4 | 1 | 25 | STD | G | 4.00 | 35.0 | 58.3 | 3.85 | 10.250 | 0.430 | 0.413 | 85.8 | 13.0 | 415.5 | 0.400 | 92.8 | ±4.8 | 120 | 111.6 | 3571 | DAYTON | 0 | ST255-8 | 3 | 25 | STD | G | 8.00 | 41.1 | 48.7 | 6.30 | 9.940 | 0.320 | 0.310 | 49.9 | 15.9 | 340.0 | 1.230 | 93.3 | ±5.5 | 250 | 116.2 | 4180 | DAYTON | 0 | TIT280C-4 | 3 | 25 | STD | G | 4.00 | 29.6 | 28.3 | 3.30 | 7.340 | 0.470 | 0.442 | 156.0 | 14.3 | 330.1 | 3.090 | 87.8 | ±8.6 | 400 | 111.1 | 4677 | DAYTON | 0 | TS280D-4 | 3 | 25 | STD | G | 4.00 | 25.6 | 33.7 | 3.24 | 6.196 | 0.432 | 0.404 | 175.1 | 14.5 | 330.0 | 1.590 | 87.1 | ±8.3 | 300 | 109.0 | 4858 | DAYTON | 0 | TS280D-4 TITANIC MK 4 | 3 | 25 | STD | G | 4.00 | 29.6 | 27.8 | 3.30 | 4.980 | 0.400 | 0.370 | 171.6 | 16.2 | 343.1 | 3.630 | 88.4 | ±6.4 | 300 | 110.4 | 4177 | DAYTON | 0 | UM10-22 10 | 3 | 25 | STD | G | 4.00 | 26.2 | 35.1 | 3.00 | 3.030 | 0.540 | 0.458 | 158.4 | 12.0 | 327.8 | 1.270 | 86.9 | ±10.9 | 500 | 110.7 | 7765 | DAYTON | 0 | UM10-22 v2021 | 1 | 25 | STD | SUB | 4.00 | 26.9 | 23.5 | 3.20 | 3.080 | 0.590 | 0.495 | 224.4 | 14.3 | 327.8 | 1.280 | 84.9 | ±9.0 | 500 | 108.9 | 972 | DAYTON | 0 | 12 DVC | 1 | 31 | STD | G | 4.00 | 25.0 | 147.3 | 3.05 | 4.000 | 0.380 | 0.347 | 88.9 | 10.6 | 480.0 | 1.400 | 94.0 | ±15.5 | 600 | 118.6 | 4257 | DAYTON | 0 | 310-8 | 1 | 31 | STD | G | 8.00 | 44.4 | 81.9 | 5.80 | 8.630 | 0.510 | 0.482 | 62.0 | 14.0 | 530.9 | 1.530 | 94.9 | ±3.5 | 80 | 113.7 | 8179 | DAYTON | 0 | APOLLO 12LF | 1 | 31 | STD | G | 8.00 | 28.0 | 147.8 | 6.70 | 5.190 | 0.220 | 0.211 | 87.1 | 21.6 | 533.0 | 1.470 | 94.4 | ±8.3 | 400 | 120.6 | 8180 | DAYTON | 0 | APOLLO 12N | 1 | 31 | STD | BM | 8.00 | 38.0 | 128.1 | 7.50 | 7.750 | 0.270 | 0.261 | 47.0 | 17.6 | 494.6 | 1.210 | 96.4 | ±6.8 | 400 | 121.5 | 2739 | DAYTON | 0 | DC300-8 | 3 | 31 | STD | G | 8.00 | 26.2 | 133.1 | 6.40 | 3.980 | 0.480 | 0.428 | 96.7 | 14.6 | 498.8 | 2.700 | 89.9 | ±4.3 | 80 | 106.8 | 6803 | DAYTON | 0 | DC300-8 v2018 | 3 | 31 | STD | G | 8.00 | 22.9 | 181.5 | 6.80 | 3.210 | 0.370 | 0.332 | 92.8 | 15.7 | 498.8 | 2.930 | 90.4 | ±4.3 | 80 | 106.7 | 2747 | DAYTON | 0 | DCS305-4 | 3 | 31 | STD | G | 4.00 | 22.9 | 116.6 | 3.20 | 5.590 | 0.440 | 0.408 | 144.5 | 12.3 | 498.8 | 1.940 | 91.0 | ±9.3 | 250 | 111.6 | 5406 | DAYTON | 0 | DCS305-4 v2015 | 3 | 31 | STD | G | 4.00 | 24.2 | 92.3 | 3.30 | 5.070 | 0.430 | 0.396 | 163.4 | 13.8 | 498.8 | 2.060 | 90.7 | ±8.4 | 250 | 111.9 | 6529 | DAYTON | 0 | DCS305-4 v2017 | 3 | 31 | STD | G | 4.00 | 24.2 | 92.3 | 3.30 | 5.070 | 0.430 | 0.396 | 163.4 | 13.8 | 498.8 | 2.060 | 90.7 | ±8.4 | 250 | 111.9 | 6763 | DAYTON | 0 | DCS305-4 v2018 | 3 | 31 | STD | G | 4.00 | 24.2 | 92.3 | 3.30 | 5.070 | 0.430 | 0.396 | 163.4 | 13.8 | 498.8 | 2.060 | 90.7 | ±8.4 | 250 | 111.9 | 7693 | DAYTON | 0 | DCS305-4 v2021 | 1 | 31 | STD | G | 4.00 | 24.2 | 92.3 | 3.30 | 5.070 | 0.430 | 0.396 | 163.4 | 13.8 | 498.8 | 2.060 | 90.7 | ±8.4 | 250 | 111.9 | 6039 | DAYTON | 0 | DS315-8 | 1 | 31 | STD | G | 8.00 | 24.2 | 159.1 | 6.10 | 1.790 | 0.370 | 0.307 | 101.8 | 16.0 | 517.0 | 1.430 | 91.0 | ±5.5 | 120 | 110.8 | 5953 | DAYTON | 0 | DSA315-8 | 1 | 31 | STD | G | 8.00 | 24.2 | 147.0 | 6.00 | 1.890 | 0.400 | 0.330 | 105.6 | 15.5 | 506.7 | 1.110 | 90.4 | ±5.5 | 120 | 110.0 | 3288 | DAYTON | 0 | DSC305-4 | 3 | 31 | STD | G | 4.00 | 23.0 | 116.0 | 3.20 | 5.590 | 0.440 | 0.408 | 143.5 | 12.3 | 498.0 | 1.940 | 91.0 | ±9.3 | 250 | 111.6 | 6810 | DAYTON | 0 | LS12-44 | 1 | 31 | STD | G | 8.00 | 33.7 | 56.6 | 7.50 | 4.950 | 0.560 | 0.503 | 165.5 | 21.7 | 547.3 | 5.340 | 88.1 | ±5.6 | 250 | 113.0 | 7695 | DAYTON | 0 | MAX-X MX12-22 | 2 | 31 | DB | G | 4.00 | 28.8 | 45.7 | 3.95 | 3.250 | 0.390 | 0.348 | 248.2 | 21.3 | 514.7 | 5.090 | 89.5 | ±7.4 | 600 | 115.2 | 6245 | DAYTON | 0 | PA310-8 | 1 | 31 | STD | G | 8.00 | 39.0 | 91.8 | 5.47 | 8.850 | 0.302 | 0.292 | 71.7 | 17.8 | 530.9 | 1.680 | 96.2 | ±5.0 | 450 | 118.9 | 973 | DAYTON | 0 | QU4TRO 12" | 3 | 31 | STD | G | 4.00 | 27.0 | 120.1 | 3.50 | 10.500 | 0.370 | 0.357 | 103.9 | 12.9 | 506.0 | 2.500 | 93.6 | ±8.7 | 250 | 115.1 | 8109 | DAYTON | 0 | RSS315HE-22 | 1 | 31 | DB | G | 8.00 | 32.0 | 32.4 | 4.10 | 4.800 | 0.510 | 0.461 | 266.5 | 20.8 | 499.0 | 2.200 | 88.1 | ±8.2 | 800 | 115.3 | 2184 | DAYTON | 0 | RSS315HF-4 | 3 | 31 | STD | SUB | 4.00 | 25.0 | 85.1 | 3.30 | 3.120 | 0.580 | 0.489 | 176.9 | 12.6 | 514.7 | 1.040 | 89.4 | ±10.1 | 400 | 112.7 | 5901 | DAYTON | 0 | RSS315HF-4 v2016 | 1 | 31 | STD | G | 4.00 | 24.2 | 84.1 | 3.10 | 2.830 | 0.450 | 0.388 | 191.0 | 14.1 | 514.7 | 0.960 | 90.3 | ±9.3 | 400 | 113.2 | 3286 | DAYTON | 0 | RSS315HFA-8 | 3 | 31 | STD | SUB | 8.00 | 25.0 | 75.0 | 6.45 | 2.940 | 0.640 | 0.526 | 189.4 | 17.3 | 500.0 | 1.600 | 85.5 | ±9.9 | 400 | 111.7 | 5902 | DAYTON | 0 | RSS315HFA-8 v2016 | 1 | 31 | STD | SUB | 8.00 | 22.2 | 97.2 | 6.50 | 2.500 | 0.540 | 0.444 | 189.8 | 17.9 | 506.0 | 1.560 | 85.8 | ±11.0 | 400 | 111.9 | 4386 | DAYTON | 0 | RSS315HO-4 | 3 | 31 | STD | G | 4.00 | 31.6 | 33.5 | 3.40 | 4.270 | 0.450 | 0.407 | 281.2 | 20.5 | 514.7 | 1.930 | 89.4 | ±7.2 | 700 | 115.2 | 6152 | DAYTON | 0 | RSS315HO-4 v2017 | 1 | 31 | STD | G | 4.00 | 26.2 | 53.7 | 3.20 | 3.630 | 0.330 | 0.303 | 255.2 | 20.2 | 514.7 | 1.750 | 90.6 | ±8.6 | 700 | 116.1 | 7268 | DAYTON | 0 | RSS315HO-4 v2020 | 3 | 31 | CAR | G | 4.00 | 26.2 | 54.0 | 3.20 | 3.630 | 0.330 | 0.303 | 254.1 | 20.1 | 515.0 | 1.750 | 90.6 | ±8.6 | 700 | 116.1 | 5097 | DAYTON | 0 | RSS315HO-44 | 1 | 31 | STD | SUB | 2.00 | 20.9 | 60.1 | 1.70 | 4.260 | 0.420 | 0.382 | 358.3 | 13.8 | 514.7 | 0.830 | 89.9 | ±11.5 | 700 | 112.7 | 5778 | DAYTON | 0 | RSS315HO-44 v2016 | 1 | 31 | STD | G | 8.00 | 21.5 | 61.3 | 6.50 | 3.700 | 0.410 | 0.369 | 322.2 | 26.3 | 507.1 | 3.170 | 84.6 | ±11.3 | 700 | 113.2 | 2073 | DAYTON | 0 | SD315-88 | 3 | 31 | STD | G | 4.00 | 26.9 | 122.8 | 3.00 | 3.440 | 0.380 | 0.342 | 109.2 | 12.1 | 522.8 | 1.310 | 94.2 | ±5.5 | 120 | 111.8 | 4306 | DAYTON | 0 | SD315A-88 | 3 | 31 | STD | G | 4.00 | 24.2 | 151.7 | 3.10 | 3.540 | 0.370 | 0.335 | 109.2 | 11.8 | 522.8 | 1.500 | 93.7 | ±6.4 | 120 | 111.4 | 2958 | DAYTON | 0 | ST305-8 | 3 | 31 | STD | G | 8.00 | 29.6 | 128.1 | 6.00 | 10.550 | 0.360 | 0.348 | 81.2 | 15.9 | 506.7 | 3.070 | 92.9 | ±8.0 | 275 | 116.2 | 5811 | DAYTON | 0 | ST305-8 Séries II | 1 | 31 | DB | G | 8.00 | 26.2 | 164.0 | 6.20 | 7.500 | 0.350 | 0.334 | 81.0 | 15.4 | 506.7 | 3.620 | 92.3 | ±8.0 | 275 | 114.5 | 6193 | DAYTON | 0 | TIT320C-4 Titanic Mk III | 1 | 31 | STD | SUB | 4.00 | 24.9 | 64.3 | 3.10 | 7.030 | 0.490 | 0.458 | 225.1 | 14.9 | 502.7 | 2.790 | 89.2 | ±10.5 | 500 | 113.2 | 7058 | DAYTON | 0 | TITANIC | 3 | 31 | CAR | G | 4.00 | 36.3 | 44.0 | 3.00 | 5.280 | 0.560 | 0.506 | 151.9 | 13.6 | 498.0 | 3.500 | 92.0 | ±7.4 | 500 | 115.9 | 4859 | DAYTON | 0 | TS320D-4 TITANIC MK 4 | 3 | 31 | STD | G | 4.00 | 28.3 | 64.1 | 3.20 | 5.970 | 0.490 | 0.453 | 172.1 | 14.1 | 498.0 | 3.100 | 90.7 | ±9.8 | 500 | 114.8 | 4181 | DAYTON | 0 | UM12-22 | 3 | 31 | STD | SUB | 4.00 | 24.9 | 71.6 | 3.30 | 3.450 | 0.710 | 0.589 | 192.8 | 11.8 | 490.9 | 1.220 | 87.7 | ±12.5 | 600 | 112.8 | 6207 | DAYTON | 0 | UM12-22 v2017 | 1 | 31 | DB | SUB | 4.00 | 26.2 | 46.8 | 3.20 | 3.620 | 0.710 | 0.594 | 266.4 | 14.1 | 490.9 | 1.250 | 86.7 | ±9.9 | 600 | 111.6 | 8108 | DAYTON | 0 | APOLLO 15LF | 1 | 38 | --- | G | 8.00 | 25.5 | 331.0 | 6.40 | 6.700 | 0.270 | 0.260 | 115.6 | 21.0 | 837.0 | 1.740 | 96.0 | ±9.3 | 1000 | 121.9 | 8181 | DAYTON | 0 | APOLLO 15N | 1 | 38 | STD | G | 8.00 | 44.0 | 154.7 | 5.80 | 10.470 | 0.340 | 0.329 | 84.6 | 20.0 | 844.5 | 0.140 | 99.3 | ±6.3 | 500 | 126.0 | 4270 | DAYTON | 0 | DC-380-8 | 1 | 38 | STD | G | 8.00 | 21.5 | 305.8 | 6.50 | 3.520 | 0.390 | 0.351 | 175.0 | 19.9 | 834.7 | 3.340 | 91.8 | ±4.4 | 100 | 109.6 | 6813 | DAYTON | 0 | DC380-8 | 1 | 38 | STD | G | 8.00 | 18.8 | 391.4 | 6.43 | 2.870 | 0.336 | 0.301 | 178.8 | 20.1 | 834.7 | 3.090 | 91.8 | ±4.4 | 100 | 108.7 | 4798 | DAYTON | 0 | DCS380-4 | 3 | 38 | STD | SUB | 4.00 | 22.9 | 233.9 | 3.10 | 3.460 | 0.590 | 0.504 | 194.4 | 12.1 | 819.4 | 2.320 | 92.9 | ±8.4 | 250 | 113.3 | 6530 | DAYTON | 0 | DCS380-4 v2017 | 1 | 38 | STD | SUB | 4.00 | 21.5 | 267.0 | 2.90 | 3.790 | 0.490 | 0.434 | 193.2 | 12.4 | 819.4 | 2.310 | 93.7 | ±8.4 | 250 | 113.4 | 5921 | DAYTON | 0 | DCS385-4 | 1 | 38 | STD | SUB | 4.00 | 17.5 | 311.0 | 3.30 | 5.270 | 0.420 | 0.389 | 269.4 | 15.3 | 850.0 | 2.200 | 91.8 | ±9.3 | 300 | 111.9 | 5362 | DAYTON | 0 | DVC385-88 | 1 | 38 | STD | SUB | 4.00 | 20.9 | 237.0 | 2.40 | 8.650 | 0.470 | 0.446 | 236.1 | 12.6 | 829.6 | 2.310 | 93.8 | ±11.1 | 350 | 115.2 | 5721 | DAYTON | 0 | IB385-8 | 1 | 38 | STD | SUB | 8.00 | 21.5 | 248.9 | 5.20 | 8.920 | 0.630 | 0.588 | 207.2 | 15.2 | 819.4 | 0.000 | 89.8 | ±12.4 | 350 | 114.6 | 7699 | DAYTON | 0 | MX15-22 | 1 | 38 | DB | SUB | 4.00 | 21.7 | 146.1 | 3.99 | 4.270 | 0.460 | 0.415 | 346.8 | 20.3 | 819.8 | 5.510 | 90.1 | ±12.3 | 800 | 117.2 | 4797 | DAYTON | 0 | PA380-8 | 3 | 38 | STD | G | 8.00 | 28.3 | 250.5 | 5.80 | 9.990 | 0.230 | 0.225 | 126.4 | 23.8 | 845.0 | 3.380 | 97.3 | ±5.0 | 500 | 119.8 | 5389 | DAYTON | 0 | PA380-8 v2015 | 1 | 38 | STD | G | 8.00 | 31.6 | 175.0 | 6.30 | 12.200 | 0.270 | 0.264 | 145.1 | 25.9 | 845.0 | 4.120 | 96.1 | ±5.0 | 500 | 120.2 | 4805 | DAYTON | 0 | PA385S-8 | 3 | 38 | STD | G | 8.00 | 37.0 | 111.5 | 5.84 | 6.820 | 0.390 | 0.369 | 172.2 | 24.5 | 860.5 | 4.300 | 95.0 | ±8.5 | 1000 | 124.7 | 6814 | DAYTON | 0 | PA385S-8 v2018 | 3 | 38 | STD | G | 8.00 | 37.7 | 80.4 | 5.99 | 7.900 | 0.392 | 0.373 | 230.1 | 28.9 | 860.5 | 4.380 | 93.6 | ±7.2 | 1000 | 123.5 | 7379 | DAYTON | 0 | PN395-8 | 1 | 38 | STD | G | 8.00 | 44.1 | 96.8 | 5.50 | 8.820 | 0.360 | 0.346 | 149.5 | 25.2 | 890.3 | 2.200 | 97.2 | ±6.1 | 800 | 125.7 | 3716 | DAYTON | 0 | RSS390HF-4 | 3 | 38 | STD | SUB | 4.00 | 18.0 | 281.8 | 3.30 | 3.100 | 0.490 | 0.423 | 267.7 | 14.3 | 829.6 | 1.000 | 91.1 | ±14.0 | 500 | 115.1 | 5582 | DAYTON | 0 | RSS390HF-4 v2015 | 1 | 38 | STD | SUB | 4.00 | 19.5 | 212.0 | 3.00 | 3.020 | 0.500 | 0.429 | 303.2 | 14.9 | 829.6 | 0.920 | 91.2 | ±12.0 | 500 | 115.0 | 4387 | DAYTON | 0 | RSS390HO-4 | 3 | 38 | STD | G | 4.00 | 24.2 | 109.7 | 3.30 | 4.480 | 0.420 | 0.384 | 380.4 | 21.3 | 829.6 | 1.830 | 91.5 | ±9.6 | 800 | 117.8 | 6311 | DAYTON | 0 | RSS390HO-4 v2017 | 1 | 38 | STD | G | 4.00 | 21.5 | 168.0 | 3.20 | 3.690 | 0.350 | 0.320 | 315.0 | 19.7 | 830.0 | 1.790 | 92.7 | ±11.4 | 800 | 118.8 | 4189 | DAYTON | 0 | ST385-8 | 3 | 38 | STD | G | 8.00 | 18.8 | 301.0 | 5.80 | 8.300 | 0.330 | 0.317 | 241.2 | 22.4 | 850.1 | 4.090 | 91.2 | ±7.9 | 300 | 113.5 | 3988 | DAYTON | 0 | TIT400C | 3 | 38 | STD | SUB | 4.00 | 24.2 | 154.3 | 3.80 | 6.750 | 0.520 | 0.483 | 254.1 | 16.8 | 804.2 | 2.570 | 91.5 | ±13.3 | 800 | 118.5 | 4791 | DAYTON | 0 | TS400D-4 TITANIC MK 4 | 3 | 38 | STD | SUB | 4.00 | 17.1 | 261.0 | 3.90 | 6.140 | 0.390 | 0.367 | 314.5 | 18.4 | 822.2 | 3.700 | 90.3 | ±18.8 | 900 | 117.9 | 4236 | DAYTON | 0 | UM15-22 ULTIMAX DVC | 1 | 38 | STD | SUB | 4.00 | 19.5 | 224.3 | 3.40 | 2.400 | 0.590 | 0.474 | 276.3 | 14.0 | 814.6 | 1.310 | 90.2 | ±9.5 | 800 | 112.0 | 8227 | DAYTON | 0 | UMII15-22 | 1 | 38 | STD | SUB | 8.00 | 29.0 | 96.0 | 4.20 | 2.340 | 1.000 | 0.701 | 275.2 | 14.5 | 791.0 | 0.700 | 88.5 | ±9.3 | 900 | 116.2 | 8182 | DAYTON | 0 | APOLLO 18F | 1 | 46 | STD | G | 8.00 | 32.0 | 287.7 | 6.50 | 8.970 | 0.420 | 0.401 | 173.6 | 23.2 | 1200.0 | 2.250 | 96.4 | ±10.6 | 1200 | 126.3 | 8183 | DAYTON | 0 | APOLLO 18N | 1 | 46 | STD | G | 8.00 | 32.0 | 253.6 | 6.10 | 10.020 | 0.350 | 0.338 | 196.9 | 26.3 | 1200.0 | 0.610 | 96.9 | ±9.1 | 1200 | 126.4 | 3680 | DAYTON | 0 | DCS450-4 | 1 | 46 | STD | SUB | 4.00 | 24.9 | 280.3 | 3.20 | 5.640 | 0.510 | 0.468 | 262.8 | 16.1 | 1134.1 | 2.960 | 95.2 | ±7.5 | 300 | 117.2 | 3868 | DAYTON | 0 | PA460-8 18 | 3 | 46 | STD | G | 8.00 | 26.2 | 473.5 | 5.30 | 6.900 | 0.280 | 0.269 | 169.1 | 23.0 | 1244.1 | 3.310 | 98.6 | ±6.0 | 500 | 121.7 | 3869 | DAYTON | 0 | PA460-8 18 PRO WOOFER | 1 | 46 | STD | G | 8.00 | 26.2 | 473.5 | 5.30 | 6.900 | 0.280 | 0.269 | 169.1 | 23.0 | 1244.1 | 3.310 | 98.6 | ±6.0 | 500 | 121.7 | 5629 | DAYTON | 0 | PA460-8 v2015 | 1 | 46 | STD | G | 8.00 | 28.3 | 402.0 | 5.60 | 11.200 | 0.340 | 0.330 | 169.9 | 22.3 | 1241.1 | 3.900 | 97.8 | ±6.0 | 500 | 121.2 | 6838 | DAYTON | 0 | PA465S-8 | 1 | 46 | STD | G | 8.00 | 32.3 | 193.0 | 5.40 | 6.920 | 0.620 | 0.569 | 264.6 | 21.6 | 1225.0 | 4.980 | 93.9 | ±9.9 | 1000 | 123.4 | 4123 | DAYTON | 0 | RSS460HO-4 | 3 | 46 | STD | SUB | 4.00 | 19.6 | 298.0 | 3.41 | 3.900 | 0.430 | 0.387 | 420.2 | 20.3 | 1164.0 | 2.100 | 92.9 | ±12.8 | 900 | 119.4 | 5451 | DAYTON | 0 | RSS460HO-4 v2015 | 1 | 46 | STD | G | 4.00 | 18.8 | 272.0 | 3.20 | 4.050 | 0.350 | 0.322 | 500.4 | 23.2 | 1164.0 | 2.240 | 93.1 | ±11.9 | 900 | 119.7 | 4687 | DAYTON | 0 | UM18-22 18 | 3 | 46 | STD | SUB | 8.00 | 19.5 | 216.8 | 4.46 | 3.082 | 0.578 | 0.487 | 633.2 | 24.5 | 1213.0 | 3.090 | 89.0 | ±12.2 | 1000 | 117.5 | 5474 | DAYTON | 0 | UM18-22 v2015 | 1 | 46 | STD | SUB | 8.00 | 19.5 | 212.0 | 4.40 | 3.820 | 0.620 | 0.533 | 654.5 | 23.9 | 1219.0 | 2.220 | 88.6 | ±12.6 | 1000 | 117.1 | 8212 | DAYTON | 0 | UMII18-22 ULTIMAX II DVC | 1 | 46 | STD | SUB | 8.00 | 22.0 | 248.2 | 4.20 | 2.530 | 0.670 | 0.530 | 414.4 | 18.9 | 1184.0 | 1.150 | 90.7 | ±13.8 | 1200 | 119.8 | 7483 | DAYTON | 0 | HTS545HE-4 KRAKEN | 1 | 54 | CAR | G | 4.00 | 26.3 | 179.0 | 3.80 | 7.900 | 0.290 | 0.280 | 667.1 | 38.0 | 1525.0 | 8.500 | 95.7 | ±8.8 | 2000 | 126.5 | 7484 | DAYTON | 0 | PSS545HE-4 VORTEX | 1 | 54 | CAR | G | 4.00 | 28.8 | 212.1 | 3.80 | 7.280 | 0.280 | 0.270 | 510.3 | 35.4 | 1590.0 | 8.200 | 97.8 | ±8.6 | 2000 | 128.5 |
|---|
Base de données du site de Dominique PETOIN https://petoindominique.fr --- Reproduction interdite sans mon accord écrit, consultation via le site autorisée même en usage professionnel.
En bleu, les valeurs entrées en base de données. En blanc, les valeurs calculées avec les formule ci-dessous.
En rouge, une erreur pratiquement certaine, une confusion entre impédance et résistance au courant continu de la bobine du HP.
- Qts=Qms*Qes/(Qms+Qes)
- Mms=(C*Sd/(2*Pi*Fs))2*Ro/Vas
- Rd=racine(Sd/pi)
- Mmrf=(8*Ro*Rd3)/3
- Mmd=Mms-Mmrf
- Rms=2*Pi*Fs*Mms/Qms
- B.L=(2*Pi*Fs*Mms*Re/Qes)1/2
- Rend=(4*Pi2/C3)*(Fs3*Vas/Qes)*100
- Sens=10*LOG(Rend/100)+112.1+10*LOG(8/Re) en dB/2.83V/m
- Sens=10*LOG(Rend/100)+112.1 en dB/W/m
- Xmax et Puissance sont liés : Si la puissance calculée est environ 4 fois plus grande que celle indiquée par le fabricant, c'est qu'il y a un Xmax 2 fois trop grand.
En cas de différence entre les données calculées et celles indiquées par le fabricant du HP, vérifiez si les valeurs en bleu sont identiques à celles du fabricant.
Si c'est le cas, dites vous bien qu'un calcul informatique ne peut pas être a la fois juste pour un HP et faux pour un autre.
Le calcul est soit juste pour tous, soit faux pour tous.
J'ai vérifié soigneusement...
Un grand merci pour votre visite. --- Retour direct en haut de la page ---
Un grand-père facétieux disait à ses petits enfants que le grand truc blanc tout en haut du Puy-de-Dôme était un thermomètre géant.
Quand il deviendra tout rouge il faudra vite se sauver, parce que le volcan va se réveiller !!!
Dôme Acoustique
Contrôle de validation W3C du code HTML 5 de la page, copiez l'adresse de la page avant de cliquer sur le lien.
Contrôle de validation W3C des CSS de la page, copiez l'adresse de la page avant de cliquer sur le lien.
Test "responsive" en simulant des écrans de smartphone de résolution différentes.
Ce sont trois outils de contrôle pour le webmaster du site Dôme Acoustique, c'est inutile pour les utilisateurs.
Avoir le lien dans chaque page est plus simple pour les retrouver.